What Is a Cabinet Carcass?

Overview
The carcass, also called the cabinet box, is the structural shell, two sides, a top or stretchers, a bottom, and a back, before the doors, drawer fronts, and hardware go on. Everything hangs on it, so the carcass material sets the cabinet’s real quality.
Carcasses are built from plywood, particleboard, or MDF. Plywood holds screws and hinges best, shrugs off sink-cabinet moisture, and will not sag on long spans, which is why quality lines box in plywood and reserve MDF for painted door center panels.
BWC note
Every BWC carcass is plywood, never particleboard: framed lines use 1/2-inch boxes and the frameless lines use 3/4-inch. See plywood cabinets for the lines built on that spec.
Frequently asked questions
What is a cabinet carcass?
It is the box of the cabinet, the sides, top or stretchers, bottom, and back, before the door and drawer fronts are added. It carries all the load, so its material matters most.
What is the best material for a cabinet carcass?
Plywood. It holds fasteners, tolerates moisture, and resists sagging better than particleboard or MDF, which is why better cabinets box in plywood.
Is a plywood carcass better than particleboard?
For strength and longevity, yes. Plywood grips hinge and slide screws and handles humidity; particleboard is heavier, weaker at the edges, and swells if it gets wet.
Alex Jordan
Kitchen Cabinet Resources
Kitchen Cabinet Collection
I’ve ordered two kitchens’ worth of cabinets from Buy Wholesale Cabinets, and they are great.




















Sales:
Customer Service: